C.C.T.V. Inspection Systems
Camera systems for internal pipe inspections for diameters ranging from 8mm tubes up to 2 metre diameter pipelines.
|
SUMMARY
OF CAMERA SYSTEMS
|
||
| Explosion Proof Flexiscan Camera System | ||
 |
This is an explosion proof, tractor mounted colour camera system which can be used in pipework from 6" to approx. 36" id. When in use as a borehole camera system, using larger lights, pipework up to 60" id can be inspected. It features a built in pan and tilt with no external moving parts, inclinometer, and variable speed tractor. A maximum dis- tance of 250m is achievable under favourable conditions. It is watertight to a depth of in excess of 100m. |  |
| Pearpoint Colour Flexiprobe | ||
 |
A forward viewing colour camera system which can be used in pipework from 1.73" id to in excess of 24" id to a maximum length of 125m depending on pipework configuration. It is waterproof to over 100m water depth. It features a semi rigid fibreglass coated umbilical allowing the camera to be pushed through complicated pipework runs inaccessible by tractor mounted units. |  |
| Pearpoint Colour Explosion Proof Flexiprobe | ||
 |
This is similar to the above except that the camera and lightheads are of explosion proof design allowing it to be used in hazardous areas. The control unit and cable drum are not explosion proof and must be sighted in a safe area. Due to the different design of the lightheads, this can only be used in systems 3 "id and above. |  |
| Pearpoint MiniProbe | ||
 |
This is a miniature version of the Flexiprobe. This will inspect pipework from 1 " to 6" id to a maximum distance of 50m in full colour . |  |
| Welch Alwyn Video Probe 2000 | ||
 |
This is a video endiscope system utilising video rather than fibreoptic techniques to inspect pipework from 1/2" to 3"id. 3m and 20m probes are available. The image is in full colour All the above camera systems feature on-screen text overlay and video recording facilities. All except the MiniProbe and Welch Alwyn also feature on-screen meterage -accurate to 0.1m. All systems can be switched to operate on both 110 and 240v. |
|
 |
Back to Index |